Permco Sleeve Bushing Pumps
Permco Sleeve Bushing Pumps and Motors
P124 SERIES TANDEM
SINGLE INLET/DUAL OUTLET

PERMCO 124 SERIES FEATURES:
- Heavy duty sleeve bushing design in a small frame size
- Cubic inch displacements from 0.62 through 2.4
- Working pressure up to 3500 PSI
- Speeds up to 3000 RPM
- Flows up to 30 GPM
- Doweled and high strength cast iron construction
- 100% factory tested
- High strength alloy steel gear and shaft sets
- Available as a clutch pump
- A wide range of porting, mounting, and shaft options available
- Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges
- Both single inlet/single outlet and single inlet/dual outlet bearing carriers available
- VIEW: P124 SERIES BROCHURE
P197 SERIES TANDEM
DUAL INLET/OUTLET

PERMCO 197 SERIES FEATURES:
- Heavy duty sleeve bushing design in a medium/small frame size
- Cubic inch displacements from .99 through 3.94
- Working pressure up to 4000 PSI
- Speeds up to 2400 RPM
- Flows up to 40 GPM
- Doweled and high strength cast iron construction
- 100% factory tested
- High strength alloy steel gear and shaft sets
- A wide range of porting, mounting, and shaft options available
- Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges
- Both single inlet/single outlet and single inlet/dual outlet bearing carriers available
- VIEW: P197 SERIES BROCHURE
P257 SERIES TANDEM
SINGLE INLET/DUAL OUTLET

PERMCO 257 SERIES FEATURES:
- Heavy duty sleeve bushing design in a medium frame size
- Cubic inch displacements from 1.29 through 6.43
- Working pressure up to 4500 PSI
- Speeds up to 2400 RPM
- Flows up to 65 GPM
- Doweled and high strength cast iron construction
- 100% factory tested
- High strength alloy steel gear and shaft sets
- A wide range of porting, mounting, and shaft options available
- Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges
- Both single inlet/single outlet and single inlet/dual outlet bearing carriers available
- VIEW: P257 SERIES BROCHURE
P360 SERIES TANDEM,
SINGLE INLET/DUAL OUTLET

PERMCO 360 SERIES FEATURES :
- Heavy duty sleeve bushing design in a large frame size
- Cubic inch displacements from 1.80 through 9.00
- Working pressure up to 3500 PSI
- Speeds up to 2400 RPM
- Flows up to 90 GPM
- Doweled and high strength cast iron construction
- 100% factory tested
- High strength alloy steel gear and shaft sets
- A wide range of porting, mounting, and shaft options available
- Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges
- Both single inlet/single outlet and single inlet/dual outlet bearing carriers available
- VIEW: P360 SERIES BROCHURE
Show:
Sort By: