Home » Hydraulics Shop » 2 Ton Dump Bed Kit For 1999 to 2017 Chevrolet or GMC Pickup Trucks With 8' Bed Lenghts
DK2UCLB99KPD • Stock Duty (Up to 4000 lb Lifting Capacity) • Chevy/GMC Dump Kit – 8? Bed – Years 99?-2017? • 2″ Fuel Filler Extension • 12V Power Down Pump – for models with 3 in round tube cross member
| Weight | 480.0 lbs |
|---|---|
| Dimensions | 48 × 36 × 12 in |
| Dump Bed Kits | 2 Ton Dump Bed Kit |
| Manufacturer | Pierce |
PIERCE Factory Hydraulic Dump Bed Kit – 2-Ton Conversion for Pickup Trucks
Available at Northern Hydraulics
Upgrade your pickup into a powerful dump truck with the PIERCE Hydraulic Dump Bed Kit, built in the USA for performance, durability, and efficiency. Perfect for contractors, farmers, landscapers, and off-road enthusiasts, this complete dump hoist kit delivers fast, heavy-duty dumping power—without removing your factory bed.
Key Benefits:
4,000 lb (2-Ton) Capacity – Easily dumps gravel, mulch, debris, or equipment with a 45° tilt angle.
Quick 10-Second Dump Cycle – High-efficiency 2,500 PSI pump and 3,000 PSI hydraulic cylinder.
Factory Bed Compatible – Keeps original truck bed height and appearance*.
All-In-One Kit – Includes hydraulic cylinder, Bucher pump, hoses, fittings, hinges, wiring, control switch, and mounting hardware.
Optional Wireless Remote – Upgrade available for added convenience.
Vehicle Compatibility:
Designed to retrofit Chevy®, GMC®, Ford®, and Dodge® trucks (select year/frame configurations).
Use your existing factory bed and avoid the high cost of dedicated dump trucks.
Installation:
Estimated install time: 12–16 hours (pro), 16–24 hours (DIY)
Step-by-step YouTube installation guide available
Recommended: Reinforce truck bed for optimal performance
Built to Last:
Fabricated in North Texas by PIERCE, this dump bed kit includes a trusted Bucher hydraulic pump and cylinders pressure-tested to 4,500 PSI for extreme reliability.
Note: Towing only permitted with frame-mounted receiver hitches. Do not use bumper or gooseneck hitches with this kit.
Order the PIERCE Dump Bed Kit Today from Northern Hydraulics
Transform your truck. Save time. Work smarter.
SKU: DK2UCLB99KPD
$1,668.00
You must be logged in to post a review.
Leave your number and a good time — one of our hydraulic specialists will call you back.


Does what it says. Took my time on the install and everything lined up pretty well. Would have been nice if the instructions were a bit clearer but nothing I couldn't work out.
lifted a full load of wet dirt and didn't even hesitate, super impressed with how well this kit performs
Took me longer than expected because I didn't read through everything before starting — my fault. Once I got it sorted out the pump ran fine and the lift capacity is plenty for what I haul. The fuel filler extension was a nice touch, wasn't expecting it to be included. Docking a star just because one of the bolt holes didn't quite line up and I had to do a little persuading.
Installed this for a customer on his 2011 GMC. Everything fit well and the kit looked complete right out of the box — that alone saves alot of headache. Bed lifts smoothly and the power down function works exactly as advertised. Customer was thrilled.
We run a couple of these trucks for hauling gravel and debris on job sites and this kit turned one of our older pickups into a legitimate work truck. The power down pump is a nice feature — no fighting gravity when you're in a hurry. Build quality is solid and it's held up well over the first few months of real use.