Home » Hydraulics Shop » Hydraulic Pumps » Gear Pumps » GP-F10-51-P-C High Pressure Hydraulic Gear Pump – Aluminium Center Section
Explore the GP-F10-51-P-C high-pressure hydraulic gear pump with an aluminum center section and cast iron end plates. Available in 8 displacement sizes. Suitable for a wide range of working conditions. Shop now!
| Weight | 7.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
| Hydraulic Pump Style | Gear Pump |
| Pump Displacement | 0.31 |
| Pump Outlet Port Style/Size | Keyed 0.50", ORB – 6 |
| Pump Mounting Flange | 2 Bolt / SAE AA / 2.00" Pilot |
| Pump Inlet Port Style/Size | ORB – 8 |
| Pump Rotation | CW |
| Manufacturer | Dynamic Fluid Components |
| Pump Manufacturers | Dynamic Fluid Components |
| Pumps Frame Size | 51 (0.31 (5.1)) |
| Pumps Drive Shaft | 1/2” dia. Straight |
| Pumps Rotation | Clockwise |
| Pumps Max Pressure | 3625 |
| Pumps Rated Speed | 2000 |
| Pumps Max Speed | 4000 |
| Pumps Displacement | 0.31 (5.1) |
Discover the GP-F10-51-P-C high-pressure hydraulic gear pump, designed with an aluminum center section and cast iron end plates. This model features 8 displacement sizes ranging from 0.07 to 0.48 in3/rev (1.3 – 8.0 cm3/rev). The pump comes with a standard mounting flange of SAE AA – 2 bolt, standard ports including SAE-8 inlet and SAE-6 outlet, and a 1/2” diameter straight shaft with 1/8” key.
Recommended for working conditions with filtration of 25 microns or better, oil viscosity ranging from 7 to 700 cSt, inlet pressure between 12 to 32 psi absolute, oil temperature from -25° to 80°C (-12° to 175°F), and ambient temperature ranging from -22° to 55°C (-8° to 130°F). This pump is suitable for a variety of industrial applications requiring high-pressure hydraulic performance. Upgrade your hydraulic system with the GP-F10-51-P-C pump today.
SKU: GP-F10-51-P-C
$154.51
You must be logged in to post a review.
Leave your number and a good time — one of our hydraulic specialists will call you back.

put this on our loader tractor and it's been running strong all season, no leaks no noise. good value.
Works great
recieved it in about three days which was faster than I expected. Pump fit right up and runs quiet. Only thing I'd say is the manual could be a little more detailed but that's pretty minor.
We run equipment hard and this pump hasn't skipped a beat. Been about four months on a mini excavator aux circuit and pressure stays consistent. Definitly buying more of these.
Used this as a replacement on a customer's dump trailer. Fit was close enough, had to shim the mount slightly, but overall the build quality is there and the customer hasn't called back so I'll take it.