Home » Hydraulics Shop » Hydraulic Pumps » Gear Pumps » GP-F20-25-P-C Hydraulic Gear Pump – High Pressure, 11 Displacement Sizes
Explore the GP-F20-25-P-C hydraulic gear pump, designed for high-pressure applications with 11 displacement sizes. Built for durability and efficiency. Order now!
| Weight | 11.0 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
| Hydraulic Pump Style | Gear Pump |
| Pump Displacement | 1.52 |
| Pump Outlet Port Style/Size | ORB – 10 |
| Pump Mounting Flange | 2 Bolt / SAE A / 3.25" Pilot |
| Pump Inlet Port Style/Size | ORB – 12 |
| Pump Rotation | CW |
| Manufacturer | Dynamic Fluid Components |
| Pump Manufacturers | Dynamic Fluid Components |
| Pumps Frame Size | 25 (1.52 (25)) |
| Pumps Drive Shaft | 5/8” dia. Straight |
| Pumps Rotation | Clockwise |
| Pumps Max Pressure | 2900 psi |
| Pumps Rated Speed | 2000 rpm |
| Pumps Max Speed | 3600 rpm |
| Pumps Displacement | 1.52 (25) |
| Pumps Ports In | SAE-12 |
| Pumps Ports Out | SAE-10 |
| Pumps Side Ported | 5.17” |
| Pumps Rear Ported | 5.62” |
Constructed of an aluminium center section and cast iron end plates, model GP-F20 is a high-pressure hydraulic gear pump with 11 displacement sizes from 0.24 – 1.95 in3/rev. (4 – 32 cm3/rev). The standard mounting flange is a SAE A – 2 bolt. Standard drive shaft is a 5/8” straight shaft with 5/32” key. Additional shaft options are available as outlined in the Ordering Example. Recommended working conditions include 25 micron or better filtration, oil viscosity of 7 – 700 cSt, inlet pressure of 12 – 32 psi absolute, oil temperature ranging from -25° – 80°C (-12° – 175°F), and ambient temperature of -22° – 55°C (-8° – 130°F). The GP-F20-25-P-C hydraulic gear pump is built for durability and efficiency, making it ideal for high-pressure applications. Upgrade your hydraulic system now!
SKU: GP-F20-25-P-C
$178.76
You must be logged in to post a review.
Leave your number and a good time — one of our hydraulic specialists will call you back.

Bought this to replace a worn-out pump on a small skid unit and it dropped right in without drama. Build quality feels solid — nothing cheap about it. Shipping was quicker than expected too.
Been running this on a log splitter build for about six weeks now and it's holding up well under steady use. Pressure's consistent and it primed up faster than I expected. Only reason I'm not leaving the top rating is the port fittings felt a little rough on one side — had to chase the threads before I could get a clean seal, which was annoying but not a dealbreaker.
works alright but took longer to get dialed in than i was hoping. no leaks which is good. not sure id buy again just because of the hassle getting it fitted up right
Pumping with ease, works great for our excavator.
Delivery was quick, and the pump is super reliable.