Enerpac SGH-series hydraulic sync grip pullers handle synchronized, controlled pulling of bearings, gears, and press-fit components where uneven loading would otherwise cock or seize the part. Enerpac (founded 1910, Milwaukee) builds high-pressure hydraulic equipment rated to 10,000 PSI, and the SGH-series carries that same pressure standard into a self-centering grip-and-pull format. Northern Hydraulics supplies these pullers and cross-references discontinued or hard-to-source Enerpac part numbers against current-production equivalents — send your old number for a match at request a quote.
Selecting an SGH puller comes down to the tonnage your pull demands, the reach (jaw spread and depth) needed to seat the grips behind the component, and the pump or power source you already run. Confirm fit by measuring the outer diameter of the part being pulled, the clearance behind it for the jaws, and the bore or shaft it rides on. Match the puller's hydraulic rating to your existing Enerpac pump output. If you run a broader Enerpac fleet, the related categories help you spec the supporting hardware: pair an SGH puller with the right hydraulic pumps for the cylinder draw, add hydraulic cylinders for separate press or jacking steps, route flow with hydraulic hoses, and round out the kit from the full Enerpac hydraulic tools line.
Pullers outlive the catalog. When an SGH part number is superseded or discontinued, the job still needs a tool that grips and pulls at the same tonnage and reach. We cross-reference legacy Enerpac puller numbers — and the pumps, hoses, and couplers that feed them — against current-production replacement and equivalent parts, so a retired line item does not stall a press-fit or bearing job. Enerpac's hollow-plunger RCH and RRH cylinder families also serve as modern alternatives where a pull-style or tensioning approach fits the application better than a fixed-jaw puller. Send the Enerpac number stamped on your tool or in your maintenance records and we will identify the match. Start at request a quote.
4 Enerpac SGH-Series Hydraulic Sync Grip Pullers models · from $2,081.32 · all in stock
Browse all Hydraulic and Mechanical Pullers →
| Model | Product | Price | Availability |
|---|---|---|---|
| SGH14 | Enerpac SGH-14 14 Ton Mechanical Sync Grip Puller | $2,081.32 | In stock |
| SGH24 | Enerpac SGH-24 24 Ton Mechanical Sync Grip Puller | $3,150.84 | In stock |
| SGH36 | Enerpac SGH-36 36 Ton Mechanical Sync Grip Puller | $5,143.99 | In stock |
| SGH64 | Enerpac SGH-64 50 Ton Mechanical Sync Grip Puller | $9,147.09 | In stock |
Yes. Every Enerpac product we list is factory-new and genuine — not aftermarket or remanufactured. Item SKUs match the manufacturer part numbers, so you can verify any model directly against Enerpac documentation.
Yes — Northern Hydraulics has supplied hydraulic equipment since 1963. Call (800) 823-4937 with your application details, or send a quote request with the model you are replacing and we will cross-reference it to the right Enerpac part.
Yes. For multi-unit or recurring orders, use the Request a Quote button — volume pricing on Enerpac equipment is quoted case by case, usually within one business day.