A convenient set for starting out or replacing what has gone bad on an existing set up.
| Weight | 18.0 lbs |
|---|---|
| Dimensions | 12 × 6 × 6 in |
This two-stage pump kit comes with a 11 gpm pump, 1/2″” and 3/4″” lovejoy, spidergear and a 3030 mounting bracket.
11 GPM Two Stage Gear Pump w/ 1″” Pipe Inlet Porting
This product is a Hi-Lo cast iron hydraulic gear pump with max pressures of 900 PSI for the low pressure and 3000 PSI for the high pressure pump. Typical applications are log splitters and presses, where alternating low and high pressures are required to move a cylinder.
Product Features:
6 HP
11 GPM
3000 PSI
3600RPM
4 Bolt Mounting
1″” Barb Inlet Port
1/2″” NPT Outlet Port
Clockwise Rotation
1/2″” Shafts use the 404 Woodruff Key
5/8″” Shafts use 3/16″”
Recommended cylinder bore size is 4″”
Shaft Diameter X Length is 1/2″” X 1-1/2″”
4 Bolt Pump Mounting Bracket for Two Stage Pumps
Honda Pump Adapter – Bell Housing
Fits 11, 13.6, and 16 GPM two stage pumps
Product Specifications:
4.5″” L bracket
3 5/8″” bolt circle
fiberglass/nylon or aluminum material
fits Haldex Models 1012, 1053, and 1056
for use with 5.5 HP Honda Engines
1/2″” Lovejoy Jaw Coupling Hub With Keyway
Half Inch Coupling Hub Specifications:
1/2″” Bore
1/8″” W X 1/16″” D Keyway
194 inch lbs Torque
11.16 HP @ 3600 RPM
2.11″” Outside Diameter
3/4″” Lovejoy Jaw Coupling Hub With Keyway
Specifications:
3/4″” Bore
3/16″” W X 13/32″” D Keyway
194 inch lbs Torque
11.16 HP @ 3600 RPM
2.11″” Outside Diameter
Hydraulic Spider
For use with up to 16 HP Engines
Urethane composition
Solid center spiders are most common
Fits L-090 and L-095 Series Lovejoy Couplers
Product part numbers:
APHL11, 3030, SP1, L095E AND L095C.
Logsplitter 11 GPM Pump With Coupler and Lovejoys
$320.00

We keep a few splitters running through the fall and this pump replaced a failed unit without any headaches. Build quality looks comparable to what we pulled off. Will order again if we need another.
Had my old setup back up and running same afternoon the package arrived. The fact that it comes as a complete kit with the coupler and lovejoys already matched up is definitly the way to go — saves a lot of guesswork.
no complaints
Dropped this onto my old splitter setup and it fired right up. The coupler and lovejoys being included saved me a trip to town, which I appreciated more than I expected.
Works, but the coupler fit was a little sloppy out of the box. Had to do some fiddling before it felt right. Pump itself seems fine so far, just not as clean a setup as I hoped for the price.